Motion Pro, Pivot suspension vise tool

This is a front fork & rear shock absorber maintenance tool. It is used to securely hold the front fork slider for maintenance like oil & seal change. It also will hold the rear shock absorber, on body, shaft or shock reservoir, for maintenance work like spring, piston rod, seal head removal etc.
- Designed to make suspension service simple and quick.
- Holds shocks and forks securely while you change oil, re-valve, or change seals.
- Pivoting head holds parts in any position, with mechanical stops every 45 degrees.
- Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system.
- Large side holds 40 mm to 61 mm diameter parts.
- Small side holds 16 mm to 34 mm diameter parts.
- Steel Frame is rigid yet has a small footprint, with 4 pre-drilled holes in the base for secure mounting to a workbench.
- Movable fluid catch pan with mesh insert, and threaded drain bung.
- HOW IT WORKS ON FORKS -
- Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip.
- Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements.
- Can be used to assist in removing compression valve assembly (use of stock front axle required).
- HOW IT WORKS ON REAR SHOCK ABSORBERS -
- Holds shock firmly around shock body, shaft or shock reservoir.
- Facilitates removal of piston rod and seal head.
- Facilitates removal of shock reservoir caps, chamber pistons or bladder.
- Holds shock to remove spherical bearings or needle bearings.
- Holds shocks for removal of shock spring.