Pol Changer

Indian bikes switch the outputs for the direction indicators to minus, when active. This make a change of the original indicators against aftermarket indicators a bit tricky. This polarity changer is the solution for it.It convert the ground switched signal from the bcm module or flasher relay to a positive supply voltage for the indicators. The module contains 2 separate channels. The maximum load is 60 Watt per side. With the green "Mode" cable you can decide if the outputs are switched on or off for 0,5 seconds when power on the module. This prevent the outputs against wrong signals when power on if a connected control box need a bit time for power up.